Recording historic roofs
We have doubled the grant rates for short course tiers 1 – 3. To address rising costs, you can now receive higher rates on course achievements from 1st April 2023
Grant Tier |
Achievement date before 1 April 2023 |
Achievement date on or after 1 April 2023 |
Grant Tier 1 Grant Tier 1 Refresher |
£30 £15 |
£60 £30 |
Grant Tier 2 Grant Tier 2 Refresher |
£70 £35 |
£140 £70 |
Grant Tier 3 Grant Tier 3 Refresher |
£120 £60 |
£240 £120 |
Overview
Standard details
CITB has developed this standard in discussion with industry.
Duration
Minimum 2 days of 6 learning hours per day
Purpose / Scope
This training module, ‘Recording historic roofs’ is intended to focus on the use and application of the underpinning historical, technological and theoretical knowledge and the requisite practical skills to undertake the correct evaluation and selection of materials, tools, equipment and craft practices relevant to recording historic roofs.
The scope covers:
- record the roof area
- details to be recorded
- why record
- methods of recording
Occupational relevance
Training delivered against this standard would be relevant to the following occupational groups:
- Operative and craft
- Supervision
- Management and leadership.
Candidate pre-requisites
Candidates must have successfully completed NVQ level 2 (Roof Slating and Tiling)
Instruction / Supervision
As a minimum, course instructors must be able to demonstrate that in relation to this standard they have:
- A train the trainer or instructional techniques course certificate
- Successfully completed training to this standard
- At least 5 years relevant industrial experience
- A verifiable CV.
Delivery
Delivery may be in an on or off the job environment.
All materials and equipment should be of suitable quality and quantity for candidates to achieve learning outcomes and must comply with relevant legislation.
The class size and candidate/instructor ratio must allow training to be delivered in a safe manner and enable candidates to achieve the learning outcomes.
The following delivery methods may/may not be used in the delivery of this standard:
- classroom
- workshop
This standard is considered to contain 51 per cent or more practical learning.
This standard is considered to be set at an advanced level.
Assessment
For the successful completion of training, candidates must complete an end of course knowledge test that measures the learning outcomes and has a pass or fail criteria.
Quality assurance
Assured
Quality assurance against this standard will require initial approval of the training organisation and their content mapped to the standard.
CITB will also conduct an approval intervention, either desk-based or centre visit, to ensure the training organisation can meet the requirements of the training standard.
Approved training organisations (ATOs) will be required to present information on records of training and assessment upon request to CITB for desk based analysis. They will also be visited annually by the CITB quality assurance team.
Renewal / refresher
There are no mandatory renewal or recommended refreshment requirements for this standard.
Approval date
TBC
Review cycle
Either on request or in 3 year(s) from approval date.
Learning outcomes
The candidate will be able to:
- Record the area to be re-covered before the work commences and the details required for:
- structure
- flora and fauna
- tile size and type
- head lap
- side lap
- margin
- gauge
- fixings
- batten (cleft/sawn) and size
- felt and the type if used
- torching (single, double, full)
- valley type/style
- hip type/style
- main ridge type/style
- mortar types
- lead details
- standard and non-standard fittings
- State the importance of recording the area to be re-covered before the work commences and the details required for:
- structure
- flora and fauna
- tile size and type
- head lap
- side lap
- margin
- gauge
- fixings
- batten (cleft/sawn) and size
- felt and the type if used
- torching (single, double, full)
- valley type/style
- hip type/style
- main ridge type/style
- mortar type
- lead details
- standard and non-standard fittings
- Explain the reasons for recording:
- accuracy of restoration
- identification of anomalies
- correct detailing
- historical record
- research
- specification requirement of clients English Heritage, National Trust etc
- Describe the different methods used for recording roofs:
- measurements
- drawing
- photos
- log books
- checking old drawings
- archive materials